Gigabyte bios live bios updating utility
While the author of this article has successfully run this procedure many times, your mileage may vary. You may want to consider updating microcode instead if it is supported by your system.fwupd is a simple daemon to allow session software to update device firmware on your local machine.
You then have one of two options: create a ISO or install the image for your bootloader.Yet another simple solution: Free DOS pre-built bootable USB flash drive image by Christian Taube. As of writing (2017-07-11), doesn't support versions of Free DOS more recent than 1.0 (current version is 1.2).The following procedure worked to upgrade an Inspiron 17-3737 to the A09 BIOS.This article aims on providing information on flashing your system BIOS under Linux.Most manufacturers provide a Windows executable or a BIOS executable that can only be run under Windows.Then, after mounting the flash drive, select under distribution Free DOS and your mounted stick.
The app will automatically download the image for you and copy it to the drive.
Finally, you may copy everything you want to flash there (BIOS, firmwares, etc).
Check out Free DOS Flash Drive on the Gentoo Wiki if you want to create a bootable Free DOS Flash drive.
I am using Z87X-UD4H and I get the same error message when trying to update from F9a to F9.
I have tried both the Q-flash utility from the BIOS screen and the bundled efiflash utility after booting to DOS on a flash drive, and they both complain that my flash utility is old.
(Dell offers this as a possibility on their site) Some notes before starting: If your flash image is too large for a floppy, go to the Free Dos bootdisk website, and download the 10Mb hard-disk image.